Pasirinkite kalbą:

Valdymo panelės su dažnio keitikliu HERTZ ONE serijos

Prekės charakteristikos

HERTZ ONE
Control systems and panels
ELECTRIC CONTROL PANEL WITH INVERTER

The HERTZ ONE control panel is an automatic control and protection
system for one electric centrifugal pump equipped with three phase or
singlephase motors.
The control panel power supply can be three phase or single phase.
The HERTZ ONE control panels include a pump control software and
allow regulation of motor speed via an electronic frequency changer
(INVERTER) that powers the pump motor. On varying the rotation
speed, the pump performance varies in terms of flow rate and head,
allowing optimal use in every condition and saving energy.

TECHNICAL DETAILS
• Energy saving: the controller modulates the pump according to
the hydraulic energy request of the plant with respect to a direct
connection in the network
• Quicker and improved regulation
• Hammering reduced thanks to gradual start-up and stop
• Improved comfort in the heating, air conditioning and pressure
boosting systems
• Reduced peak current

TECHNICAL DATA

• Current limits for 60 seconds 1.6 times the current set for 60 seconds.
Automatic restore for three times, manual restore on the fourth
intervention
• Limits of use (environment temperature): from -10°C to +40°C
• IP55 Protection rating
• Conformity to the CE mark, EN 60204-1; Security electrical
equipment. – EN 60439-1; Switchgear and controlgear assemblies.
EMC standards applied:
– CEI EN 61000-6-1; immunity for residential, commercial, and
lightindustrial environments.
– CEI EN 61000-6-2; industrial immunity.
– CEI EN 61000-6-3; emission for residential, commercial and
lightindustrial environments.
– CEI EN 61000-6-4; industrial emission.
– CEI EN 61000-3-2; harmonic current emission <= 16A (use XL.L line
inductance to be installed on request, see ref. 8.1, 8.2). Emissions:
conformity for residential environments. Immunity: conformity for
industrial environments.
• Recommended minimum output frequency: 30 Hz
• Power supply voltage (single phase version): 230V +10% -15%
• Power supply voltage (three phase version): 400V +10% -15%
• Number of pumps that can be connected: 1
• Motor power: from 0.25 kW to 4 kW

Įmonės rekvizitai

» Telefonas: +370 698 30170
» El. paštas: info@vsrautas.com
» Adresas: J. Basanavičiaus g. 160D-5, LT-76128 Šiauliai
» PVM kodas: LT450436716
» Įmonės kodas: 145043676

Žiūrėti žemėlapyje

UAB "Vandens Srautas", Šiauliai 2021 | © Visos teisės saugomos
Interneto puslapių kūrimas: UAB "GPsoft"